Dangerous Powers E1

September 16, 2017, 10:35 pm

≫ Next: Oddly Upgraded DP G3

≪ Previous: Strange Impulse

$

0

0

This




Blue DP E1
Torpedo style reg
JT barrel

The good:
Works with no leaks. Brand new eyes. New detents. Reg and gun have fresh orings. Stock board.
The bad:
The bolt has a small dent in it. Gun still gases up with no leaks, but just want to make the buyer aware. Also have the stock reg. The lower locking bonnet screw is somewhat stripped. The longer set screw works, but ultimately, a new bonnet is needed, or maybe a larger screw? The gun currently has the black torpedo reg, which works fine.

Price: $90 as pictured
$75 without the barrel and stock reg

---

Oddly Upgraded DP G3

September 17, 2017, 12:51 am

≫ Next: Dihydrogen Monoxide

≪ Previous: Dangerous Powers E1

$

0

0

This:




Black Dangerous Powers G3
Evil detonator reg
Hybrid on/off (leaks until fully turned in, then seals up fine)
Virtue oled board (oled part does not work, which is common with the oled boards. The board still works, and has the microswitch versus the opticswitch.)
ST feedneck (really just the ST feedneck collar, but still works pretty well)
Brand new eyes
Brand new detents
Stiffi 16in barrel(super light)

Gun works with no leaks. Cleaned and lubed. Gun has been used and has scratches, mostly on the evil reg.

Price:
$150 with the barrel
$135 without the barrel

Dihydrogen Monoxide

September 17, 2017, 5:32 am

≫ Next: F/S - Ninja ProV2 SLP tank regulator (for 4500 tanks)

≪ Previous: Oddly Upgraded DP G3

$

0

0

I heard a reference on the radio today about Dihydrogen Monoxide, also known as DHMO. The host is an instructor at KSU who often assigns an extra credit report on this substance to make sure people understand it's real consequences. These reports provoke much classroom discussion.

Facts about dihydrogen monoxide

Also, the lesser trusted Dihydrogen Monoxide Wikipedia has been used as a reference.

I have to confess that I have casually used Dihydrogen Monoxide, even allowing it into my home. Do you do the same?


--

F/S - Ninja ProV2 SLP tank regulator (for 4500 tanks)

September 17, 2017, 7:03 am

≫ Next: Rambo Preacher's Dueling Triplets

≪ Previous: Dihydrogen Monoxide

$

0

0

Hello. Up for sale today is my Ninja ProV2 SLP tank regulator. SLP = super low pressure. This a reg for 4500psi tanks. This regulator is used, so it will show various signs of use.

It will not come with the black back tank to reg thread protector (as seen in the pictures).

WHAT YOU SEE IS WHAT YOU GET.

ASKING PRICE IS....... $45 PAYPAL SHIPPED.

.
.
.
OTHER ITEMS FOR SALE

CCI PHANTOM PUMP PAINTBALL GUN

Five Various AGD 68 Classic Valve Automags

WGP 2K RF Autococker
.
.
.

Rambo Preacher's Dueling Triplets

September 17, 2017, 5:23 pm

≫ Next: 2 CCI phantoms and some accessories

≪ Previous: F/S - Ninja ProV2 SLP tank regulator (for 4500 tanks)

$

0

0

I bought these a while back, they are Sheridan gp single shoot markers that were modified at Palmers Pursuit, They have widgets, plated, palmers site rails, Blazer grip frames. I paid $1000.00 for them and that's the asking price for the set. I have a stock Sheridan p68sc that I will throw into the deal for that asking price. If set is split up, the price is $350.00 each for the triplets and $250.00 for the p68sc. The price is firm. The only trade I will discuss is a Benjamin Marauder .22 or .25 cal rifle and $500.00, or Benjamin Marauder .22 cal pistol and $600.00. I will post pictures when I get them pulled out of storage.
edm

2 CCI phantoms and some accessories

September 17, 2017, 5:24 pm

≫ Next: Rambo Preacher's Deuling Triplets

≪ Previous: Rambo Preacher's Dueling Triplets

$

0

0

First up is a gloss black RF with a reversed ASA setup and a T-stock. It also has a brass trigger shoe, 14" cci barrel, and a gator grip handle.. which feels extremely nice in the mitts.

The t-stock is wrapped in a carbon fiber vinyl, not actually a carbon fiber one, but it does look nice.




For the right price I'll include the 3oz BE bottle and an elbow for the loader.

$275
----------------------------------------------


Secondly is a micro-phantom setup. I put this together with spare parts and I like how it's turned out in terms of being unique and tiny. It would really be nice with a stockclass body though... The pump handle is a rough draft of a handle I was going to start producing... SO, like I said.. it's rough, but it still feels very nice in the hands and gets attention.





$200

I can include a stock handle and lower the price to $180. It has the tiniest leak coming from the cupseal area too, unless you really tighten the bucket changer down. May just need a few drops of oil.
-------------------------------------------------


I also have a CCI threaded Deadlywind barrel, which is pretty rare iirc. (not pictured) - $80, for some reason it fits the blue body and not the black one. I think the black body has a more narrow breech or something.

I'm open to 241 offers or any trade offers that come my way. Please post then pm :tup:

Want a better deal? Snag them both for $375. $425 with CCI deadlywind barrel and any other phantom accessories I may find laying around.

Rambo Preacher's Deuling Triplets

September 17, 2017, 5:31 pm

≫ Next: Ccm s6

≪ Previous: 2 CCI phantoms and some accessories

$

0

0

I bought these a while back, they are Sheridan gp single shoot markers that were modified at Palmers Pursuit, They have widgets, plated, palmers site rails, Blazer grip frames. I paid $1000.00 for them and that's the asking price for the set. I have a stock Sheridan p68sc that I will throw into the deal for that asking price. If set is split up, the price is $350.00 each for the triplets and $250.00 for the p68sc. The price is firm. The only trade I will discuss is a Benjamin Marauder .22 or .25 cal rifle and $500.00, or Benjamin Marauder .22 cal pistol and $600.00. I will post pictures when I get them pulled out of storage.
edm

Ccm s6

September 17, 2017, 5:55 pm

≫ Next: Kalale's Feed

≪ Previous: Rambo Preacher's Deuling Triplets

$

0

0

Matching anodized parts as shown
No barrel
Shooting 285 and super smooth
Works great no issues

$515






Sent from my iPhone using Tapatalk

---

Kalale's Feed

September 17, 2017, 6:06 pm

≫ Next: High end pack

≪ Previous: Ccm s6

$

0

0

Purchased a package deal from Kalale, including a marker, 2 tanks, barrel kits and a loader. Everything was very well packaged and in great condition. He even threw in a few extra items. Very please with this deal. Would definitely do business with him again.

High end pack

September 17, 2017, 6:23 pm

≫ Next: Im neeeew and dont know what do doooo

≪ Previous: Kalale's Feed

$

0

0

Which high end pack should I get? 60-80 dollar price range

Im neeeew and dont know what do doooo

September 17, 2017, 8:43 pm

≫ Next: Echo 1 mp5 RIS

≪ Previous: High end pack

$

0

0

New to paintball, and loving it so far :) I've been playing large scale airsoft and milsim for about 8 or 9 years, and quit for many reasons. Now, a year later a buddy of mine gets me into Automags and the sport, and after a few games and this last supergame West, Im hooked and loving it! My camo green splash automag is my pride and joy, but im looking forward to picking up a phantom and trying some pump play! Wish I had gotten into this sooner...

Thanks for having me, I'm looking forward to learning something on this crusty forum :rolleyes:

Echo 1 mp5 RIS

September 17, 2017, 8:54 pm

≫ Next: WTB RTR Elbow

≪ Previous: Im neeeew and dont know what do doooo

$

0

0

Just tossing a line out to see if anyone wants a mint condition never used echo 1 RIS mp5

WTB RTR Elbow

September 17, 2017, 9:06 pm

≫ Next: Barrels, SP wood grips, piles of parts

≪ Previous: Echo 1 mp5 RIS

$

0

0

I'm interested in getting a RTR Elbow in any color or condition so long as it's functional.

Like this one or similar. Not super picky.
Elbows :: 5.0 Elbow - Black - Remember The Ronin | Custom Paintball Products

Barrels, SP wood grips, piles of parts

September 17, 2017, 10:41 pm

≫ Next: 2002 Shocker Sport (Shoebox/Brick)

≪ Previous: WTB RTR Elbow

$

0

0

I somehow managed to collect a sizeable pile of parts that I'd like to clear off of my bookshelf.



Smart Parts .45 wood grips, in great condition. One side is a bit more orange than the other - $50 PENDING

Barrels


14 inch, Spyder threaded Teardrop. Stainless back, glued - $20
14 inch, cocker threaded glued All American - $20 PENDING
Dust red Luxe tip - $20 PENDING
Stock Minimag barrel - $10

Cocker Parts


2k+ aluminum cocker bolt, in good shape - $10
Trilogy Select Fire frame, with eyes, T fitting and frame screws. No eye cover - $50
Evil Smokestack - $10
System X Center Flow LPR, NOS - $10

Tippmann Parts


Benchmark? expansion chamber - $15
PTP sight rail, chrome is starting to flake - $10
BT Sealed Bolt System, screws and cocking knob included -$10 SOLD
rear cocking kit with velocity adjuster, MODEL 98 ONLY -$15
98 to Spyder barrel adapter - $10
PTP powerfeed adapter - $15
Benchmark? dropforward/offset cradle ASA - $20
**Note, the rail has been cut, the back of the cradle has been milled, and there is a notch cut for the gauge**
vertical adapter - $10 SOLD



Smart Parts 4500 tank reg, untested - $10

As always, prices include shipping and are OBO. I will ship internationally for additional price.

Trade interests:
Apex Freak tip
Brass freak inserts
CCM wide 45 frame, gloss black
CCM reg, gloss black
CCM pre-2k pump kit
17/30 compressed air tank
PPS Trilogy Rock
TechT Trilogy timing rod

Thanks for looking!!

2002 Shocker Sport (Shoebox/Brick)

September 18, 2017, 5:05 am

≫ Next: Glock 21 Gen4 w/ Box, Night Sights, 3 mags - $450

≪ Previous: Barrels, SP wood grips, piles of parts

$

0

0

Raising money to buy my fiance a Macbook.

Complete with Gadget Grip, MaxFlo, and All American barrel.
Powerfeed upgrade.
Great shape.
$150.00

Only trade interest would be a brand new Ninja 45/45

---

Glock 21 Gen4 w/ Box, Night Sights, 3 mags - $450

September 18, 2017, 5:46 am

≫ Next: Easiest way to make extra money is to not spend it

≪ Previous: 2002 Shocker Sport (Shoebox/Brick)

$

0

0

For sale is a like new Glock 21 Gen4. Included with the handgun are three [3] total magazines, Tru-Dot Night sights, the original box, back straps, and all original paperwork. A factory minus [-] marked connector is currently installed, but a factory dot [.] connector is also included. I have installed a Vicker's tactical slide stop since these photo's were taken, so that will be included as well.

I am a Glock certified armorer and this handgun has been professionally cleaned and maintained over the time I have owned it. I can provide credentials if necessary. The handgun is in like new condition inside and out, with only a minor surface abrasion near the caliber marking on the slide that is very difficult to see or photograph.

I am asking $450 firm for everything here. Add $25 to ship to your dealer anywhere in the 48 states [where this handgun is legal].

The only trades I would be interested in at this time would be Trijicon MRO or Aimpoint Micro optics.

Attached Images

	P8150055.jpg (281.5 KB)
	P8150054.jpg (284.4 KB)

Easiest way to make extra money is to not spend it

September 18, 2017, 6:46 am

≫ Next: Appraisal please, palmers front block complete

≪ Previous: Glock 21 Gen4 w/ Box, Night Sights, 3 mags - $450

$

0

0

Right now I'm going through my monthly bills and getting rid of all the things I just don't use anymore.

Audible: $23.00 a month (ouch)
Magazine subscriptions: $2.00 to $4.00 a month, but added up to $23.00 total
Home Phone: $44.50 a month - and I don't use it. Ever. Goodbye verizon.

Do you have other monthly fees such as spotify and you're not using it? Pandora maybe?

Do you have a monthly gym membership you just keep in the hopes you're going to use it?

Heck, I called my security company for an upgrade (ADT) as I've had the same system for 11 years now. I'm getting a better system and saving $5.00 a month.

Add it all up and in 24 hours I've saved myself $100 a month (rounding), or $1,200.00 a year.

Appraisal please, palmers front block complete

September 18, 2017, 7:12 am

≫ Next: Best stack tube poppet for $500?

≪ Previous: Easiest way to make extra money is to not spend it

$

0

0

Looking for appraisal. Working complete front block from a pre 99 Bob Long autococker I'm told. Rebuilt last year with palmers parts, block looks new. Worked last week before marker leaked. Fair value price as I need to liquidate to continue stock class cocker build

Thanks

Sent from my SM-G920V using Tapatalk

Best stack tube poppet for $500?

September 18, 2017, 7:35 am

≫ Next: WGP 734 & SHERIDAN 474461 appraisal help please.

≪ Previous: Appraisal please, palmers front block complete

$

0

0

So I'm trying to find the best mid-range poppet marker (I already have a spool and want something different) and I've narrowed my choices down to: Planet Eclipse Etek 5, Dangerous Power Fusion Elite, and the JT Impulse.

From what I hear the impulse is the smoothest, but parts are hard to find. The Etek is reliable and shoots pretty well, but the ergonomics and the trigger aren't great (a good trigger is very important for me). The Fusion Elite has a lot of nice features and I really like the G5 trigger, but i don't know much about how it actually shoots.

My priorities from most important to least important are: Reliability, good trigger, comfortable, quiet shot, how well it handles brittle paint, smooth shot.
What do you think I should get and why?

WGP 734 & SHERIDAN 474461 appraisal help please.

September 18, 2017, 6:08 pm

≫ Next: SOLD CCM T2F (full block) SOLD

≪ Previous: Best stack tube poppet for $500?

$

0

0

I feel like I might have found some gems here at the local flea market. They look unused, still have petroleum jelly around the threads. Mild ano scratches on the stocks.
The suppressor is a pvc home brew job, but slid of the barrel without damaging it.
The sniper is missing the piece that attaches the bolt to the backblock.
Both markers have agd sharpshooter sights
Thanks for the help, these will likely be available for sale after some refurbishing.